Re: Help
Posted: 07 Dec 2009 00:07
thank you so much i got rid of that .jar file and now it works. All though now it seems i need to better configure my controller... let the fun begin
Page 2 of 2
Re: Help
Posted: 13 Dec 2009 04:13
Now it seems i cant configure my controller properly... i am using a futaba 8u super with a usb cable. For some reason the throttle also acts on elevator and aileron channels and i cant figure out how to fix it.
Re: Help
Posted: 13 Dec 2009 10:35
Hi.
Well, the most obvious thing would be that you have CCPM mixing (or some other mixing) still enabled in your radio.
So, throttle (more like pitch) controls all three (or four) swash servos, causing an interaction if you intend to have separate channels for each.
A clean model memory with H-1 (mechnical mixing) or a simple fixed-wing programme would be a start in your radio.
Cheers
Eddi
Well, the most obvious thing would be that you have CCPM mixing (or some other mixing) still enabled in your radio.
So, throttle (more like pitch) controls all three (or four) swash servos, causing an interaction if you intend to have separate channels for each.
A clean model memory with H-1 (mechnical mixing) or a simple fixed-wing programme would be a start in your radio.
Cheers
Eddi
Re: Help
Posted: 14 Dec 2009 08:31
You're a champion, wrong swash mode was exactly the problem. I thought it had to be the same as the heli 
set it to h1 and now it works well.
Thanks
set it to h1 and now it works well.Thanks