Dynam controller

Installation and usage on Linux / Installation unter Linux
Post Reply
sportscliche
Posts: 1
Joined: 10 Apr 2012 17:58

Dynam controller

Post by sportscliche »

Hallo zusammen

ein paar Fragen:

mein Dynam 6-ch USB controller ist bei Ausgabe 4.0 demo erkennen aber bei Ausgabe 0.9 nicht. Ganz normal oder gibt es ein Problem? das Betriebssystem ist ArchLinux.

ich bin ein komplett Anfanger und finde ich die vier probe Hubschrauber mit die "collective pitch" zu schwierig. kann man einen Hubschrauber mit vier Achsen fliegen? meine Einstellung des Controllers ist Collective Pitch: z (inv), Cyclic Roll: x, Cyclic Nick: y (inv), und Rudder rz (inv).

viele Gruesse aus der USA
Mike
User avatar
Michael
Posts: 1825
Joined: 25 May 2008 16:11
Location: Germany
Contact:

Re: Dynam controller

Post by Michael »

Hi,

yes, in some situations the interface is not recognized in V0.9 but in V4. That was an improvement of version 1. Helicopter flying is not as easy. Calibrate you controller carefully and use the hover training to get familiar with the helicopter control.

Michael
Post Reply