Page 1 of 1
Wind setting doesn't persist between restarts
Posted: 23 Jun 2019 07:24
by olegan
Helis-X 8 Linux 64 bit
Go to Configuration -> Wind/Brightness -> change the wind settings -> Ok. Everything works as expected until you restart Heli-X. After restart all wind settings are at 0.
Re: Wind setting doesn't persist between restarts
Posted: 23 Jun 2019 07:30
by Michael
In HELI-X 8 the wind settings are part of the environment, because of the hang scenes. Thus, you could modify the xml of the airprt to assign the wind settings to a scene...
Re: Wind setting doesn't persist between restarts
Posted: 23 Jun 2019 20:51
by olegan
Thanks for the reply Michael
Could you please clarify which xml to change?
Code: Select all
ls resources/environments/SkyBox/Rubi/
1024 EULA_en.txt fences.xml Martin Koall.url preview.jpg trees.xml
2048 EULA.txt ground.xml others.xml Rubi.xml windsock.xml
Re: Wind setting doesn't persist between restarts
Posted: 24 Jun 2019 15:44
by olegan
Or alternatively, which aiprort already hast wind enabled?
Re: Wind setting doesn't persist between restarts
Posted: 24 Jun 2019 20:49
by Michael
You see the airprts with wind settings in the airport dialog. On the left hand side you see, eg.: SkyBox with Crashobjects and wind.
Open the xml file there and you see the wind settings.
Re: Wind setting doesn't persist between restarts
Posted: 26 Jun 2019 19:38
by olegan
Made it! Thanks