Controller setup, version 7

Installation and usage on Linux / Installation unter Linux
Post Reply
stefansommer
Posts: 2
Joined: 10 Feb 2018 13:00

Controller setup, version 7

Post by stefansommer »

My controller (DX6 and USB cable) works fine in v6.1. In v7, all stick movements seem to be too sensitive in one direction: I get correct input if I set the rates on the transmitter to -100 to +25. If I do the regular controller setup (Configuration->Controller->Stick) without modifying the rate setting on the transmitter, all inputs are much too sensitive in one direction, e.g. cyclic right is too sensitive but not cyclic left.

v.6.1 works just fine with exactly the same setup. Any ideas?

Thanks,
Stefan Sommer
User avatar
Michael
Posts: 1825
Joined: 25 May 2008 16:11
Location: Germany
Contact:

Re: Controller setup, version 7

Post by Michael »

please try different Input Systems (global options->Controller) and recalibrate afterwards.

Michael
stefansommer
Posts: 2
Joined: 10 Feb 2018 13:00

Re: Controller setup, version 7

Post by stefansommer »

Thanks, jinput-b1.jar works, the remaining systems have the same problem.

Stefan
Post Reply