Hi,
I started using the newest version of Heli-X on my macbook. It works great, but when configuring my controller, i get no response for channel x. I assume this is the channel for cyclic nick (nose up, nose down movement). Any ideas will be greatly appreciated. Thank You.
Devo 7e, No cyclic Nick!
-
- Posts: 2
- Joined: 07 Feb 2015 23:01
Re: Devo 7e, No cyclic Nick!
I have the same issue! Can somebody please help! Note full x axis is on my throttle hold switch!
I have the original f/w.
I have the original f/w.
-
- Posts: 2
- Joined: 07 Feb 2015 23:01
Re: Devo 7e, No cyclic Nick!
So the solution is to upgrade to deviation f/w and set the protocol to PPM.