Page 1 of 1

Hubsan X4 H107L V2

Posted: 20 May 2014 05:56
by WannaBeRC
Greetings all.
I am a rookie, or Untrained pilot, ;) trying to get a jump on learning so I bought the Hubsan X4 and this sim along with the HK 6channel USB Sim-mitter as specified by Helix.

It took me an afternoon of reading the manual and messing with the Flight Mode settings but I think I have a curve file that matches the flight characteristics if the Hubsan X4 H107L v2. It's in between normal and expert mode on the Hubsan TX. Not as forgiving as normal mode, but not as snappy in expert mode.

I was flying the LadyBug3D quadcoptor. Mainly because it the smallest available. I'll post it here for others to use, tell me I did it wrong or improve it.

Enjoy! :D

The forum would not let me up load .xml or ,old attachments so here it the raw data.
****************************************************************************************************************

<?xml version="1.0" encoding="UTF-8"?>

-<project>

<WWW>www.heli-x.net</WWW>

<Name>Curve4</Name>

<Comment>bumped the Expos to 42, gain to 90.</Comment>

<NickExpo>42</NickExpo>

<NickExpo2>0</NickExpo2>

<NickExpoA>0</NickExpoA>

<NickDualRate>100</NickDualRate>

<NickDualRate2>100</NickDualRate2>

<NickDualRateA>100</NickDualRateA>

<NickDeadBand>5</NickDeadBand>

<NickDeadBand2>0</NickDeadBand2>

<NickDeadBandA>0</NickDeadBandA>

<RollExpo>42</RollExpo>

<RollExpo2>0</RollExpo2>

<RollExpoA>0</RollExpoA>

<RollDualRate>100</RollDualRate>

<RollDualRate2>100</RollDualRate2>

<RollDualRateA>100</RollDualRateA>

<RollDeadBand>5</RollDeadBand>

<RollDeadBand2>0</RollDeadBand2>

<RollDeadBandA>0</RollDeadBandA>

<YawExpo>39</YawExpo>

<YawExpo2>0</YawExpo2>

<YawExpoA>0</YawExpoA>

<YawDualRate>100</YawDualRate>

<YawDualRate2>100</YawDualRate2>

<YawDualRateA>100</YawDualRateA>

<YawDeadBand>5</YawDeadBand>

<YawDeadBand2>0</YawDeadBand2>

<YawDeadBandA>0</YawDeadBandA>

<PitchCurve>-15,7,38,69,100</PitchCurve>

<PitchCurve2>-100,-50,0,50,100</PitchCurve2>

<PitchCurveA>-100,-50,0,50,100</PitchCurveA>

<ThrottleCurve>-11,6,32,62,100</ThrottleCurve>

<ThrottleCurve2>100,100,100,100,100</ThrottleCurve2>

<ThrottleCurveA>-100,-100,-100,-100,-100</ThrottleCurveA>

</project>